Cisco 7942G - Unified IP Phone VoIP 문제 해결 및 유지 관리 - 페이지 11

{카테고리_이름} Cisco 7942G - Unified IP Phone VoIP에 대한 문제 해결 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7942G - Unified IP Phone VoIP 27 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7942G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (12 페이지), 사용자 설명서 (16 페이지), 매뉴얼 (11 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지)

Troubleshooting and Maintenance

802.1X Not Enabled

Problem

The phone does not have 802.1X configured.

Cause

These errors typically indicate that 802.1X is not enabled on the phone.

Solution

To enable it, see

Factory Reset of Phone has Deleted 802.1X Shared Secret

Problem

After a reset, the phone does not authenticate.

Cause

These errors typically indicate that the phone has completed a factory reset while 802.1X was enabled. A

factory reset deletes the shared secret, which is required for 802.1X authentication and network access.

Solution

To resolve this, you have two options:

• Temporarily disable 802.1X on the switch.

• Temporarily move the phone to a network environment that is not using 802.1X authentication.

After the phone starts up normally in one of these conditions, you can access the 802.1X configuration menus

and re-enter the shared secret.

Audio and Video Problems

The following sections describe how to resolve audio and video problems.

Problem

The display appears to have rolling lines or a wavy pattern.

Cause

The phone might be interacting with certain types of older fluorescent lights in the building.

• If the shared secret is not configured, enter it, and ensure that it matches the shared secret on the

authentication server.

Security Configuration Menu

for information on enabling 802.1X on the phone.

Troubleshooting and Maintenance

802.1X Not Enabled