Siemens ED811BS16E 사용 정보 - 페이지 9
{카테고리_이름} Siemens ED811BS16E에 대한 사용 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens ED811BS16E 24 페이지. Induction hob with integrated ventilation system
페이지 인쇄7 Before using for the first time
Observe the following recommendations.
7.1 Initial cleaning
Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
siemens-home.bsh-group.com.
More information on care and cleaning. → Page 14
7.2 Preparing the appliance
To ensure correct operation, you must arrange the
components in this order:
1.
Insert the filter.
2.
Insert the metal grease filter.
Note: Never operate the appliance without the metal
grease filter and the overflow container.
8 Basic operation
8.1 Switching the hob on and off
▶
Switch the hob on and off using the main switch
If all of the cooking zones are switched off for
longer than 20 seconds, the hob is automatically
switched off.
reStart
▶
If you switch the appliance on within four seconds of
switching it off, the hob operates with the settings
that were previously set.
8.2 Setting the cooking zones
To choose the required selectable power level, touch
or
.
Each power level has an intermediate level. This is
marked with a dot.
Power level
Selecting the cooking zone and power setting
1.
Touch
to select the cooking zone.
2.
Within the next 10 seconds, select the required
power level:
Touch
to call up power level .
‒
Touch
to call up power level .
‒
a The power level has been set.
Lowest power level
Highest power level
7.3 Cooking with induction
In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.
7.4 Cookware
You can find a list of recommended cookware on the
official website siemens-home.bsh-group.com.
Further information on suitable cookware. → Page 6
7.5 Setting the operating mode
The appliance is supplied with a preset circulating-air
mode.
When your hob is installed with an air outlet to the out-
side, you must configure the setting
You can find additional information about this in the
section entitled
→ "Basic settings", Page 13
Note: If no cookware is placed on the cooking zone or
the pot is not suitable, the selected power level flashes.
.
After a certain period of time, the cooking zone
switches itself off.
quickStart
▶
If you place cookware on the hob before you switch
it on, the cookware is detected when you switch on
and the corresponding cooking zone is selected
automatically. Select the power level in the next 20
seconds, or the hob switches itself off.
Changing the power level and switching off the
cooking zone
1.
Select the cooking zone.
2.
Touch
or
pears. To switch off the cooking zone, set .
Switching off the cooking zone quickly
Touch and hold the symbol for the cooking zone for
three seconds. The cooking zone switches itself off.
Before using for the first time en
to this mode.
until the required power level ap-
9