Siemens EH 375ME11E 사용 설명서 - 페이지 9

{카테고리_이름} Siemens EH 375ME11E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH 375ME11E 16 페이지.

페이지 인쇄

Powerboost function

The Powerboost function can be used to heat large amounts of

water more quickly than the power level

Usage restrictions

This function can always be activated for a hotplate, provided

the other hotplate in the same group is not in use (see

illustration). Otherwise,

and

›

for the selected hotplate; the

automatically.

Time programming function

This function may be used in two different ways:

to automatically switch off a hotplate.

■

as a timer.

■

A hotplate should switch off automatically

The hotplate switches off automatically after the time that is set

has elapsed.

Setting the cooking time

The hob must be switched on.

Select the hotplate and set the heat setting.

Touch the

symbol. The

hotplate lights up.

appears in the timer display. To select

‹‹

a different hotplate, touch the

indicator for the required hotplate lights up.

Within the next 10 seconds, set the required cooking time in

the control panel. The possible presets from left to right are 1,

2, 3..... up to 10 minutes.

After a few seconds, the cooking time begins to elapse.

Note: The same cooking time can be automatically

programmed for the all the hotplates. The programmed time

passes independently for each of the hotplates.

The Basic settings chapter provides information on

automatically programming the cooking time.

Automatic programming

If the previous setting from 1 to 5 is pressed in the

programming panel, the cooking time is reduced by one

minute, if it is held down the time is automatically reduced to

one minute.

If the previous setting from 6 to 10 is pressed in the

programming panel , the cooking time is increased by one

minute, if it is held down the time is automatically increased to

99 minutes.

flash in the heat setting display

heat setting is then set

indicator for the required

repeatedly until the

To activate

Select the power level

Press the programming panel located above the

The function has been activated.

To turn off

Press the programming panel located above the

The Powerboost function has been deactivated.

Note: In certain circumstances, the Powerboost function may

turn off automatically in order to protect the electronic

components inside the hob.

Changing or cancelling the time

Press the

indicator lights up. Change the cooking time in the

programming panel, or set to

Once the time has elapsed

The hotplate switches off. An audible signal sounds and

appears in the time program function display for 10 seconds.

The

indicator lights up. Pressing the

indicators and stops the signal.

Notes

If a cooking time has been programmed in several zones, it

■

can be set to display all time values. To do this, press the

symbol several times until the

hotplate lights up.

Cooking times of up to 99 minutes can be programmed.

■

The timer

The timer can be set for periods of up to 99 minutes. It is

independent of the other settings. This function does not

automatically switch off a hotplate.

Programming

Press the

up.

lights up in the time program function display.

‹‹

Select the desired time in the programming panel.

The timer starts to count down after a few seconds.

Changing or cancelling the time

Press the

up. Change the cooking time in the programming panel, or set

‹‹

Once the time has elapsed

A warning beep sounds. In the time program function

display

is shown, and the

‹‹

10 seconds the indicators turn off.

Pressing the

beep.

symbol several times until the required

‹‹

indicator for the required

symbol several times until the

indicator comes on. After

symbol turns off the indicators and stops the

@›

symbol.

@›

‹‹

symbol turns off the

indicator lights