Siemens EH Series 설치 및 사용 설명서 지침 - 페이지 15
{카테고리_이름} Siemens EH Series에 대한 설치 및 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH Series 20 페이지.
Siemens EH Series에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지), 사용 설명서 (16 페이지), 사용 설명서 (24 페이지), 사용자 설명서 (20 페이지)
페이지 인쇄
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. The
heat indicator
/
flash alternately in the display.
œ
•
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
™‚
Childproof lock
‹
Deactivated.*
Activated.
‚
Audible signals
™ƒ
Confirmation and error signals deactivated.
‹
‚
Only error signal activated.
Only confirmation signal activated.
ƒ
„
All signals activated.*
Automatic programming of cooking time.
™†
‹
Switched off.*
-
Automatic shut-off time.
‚
ŠŠ
Duration of the time program function warning signal
™‡
10 seconds*.
‚
ƒ
30 seconds.
1 minute.
„
Power-Management function
™ˆ
= Deactivated.*
‹
= 1,000 W. minimum power.
‚
‚
= 1,500 W.
= 2,000 W.
ƒ
etc.
or
. = maximum power of hob.**
Š
Š
™Š
Hotplate time selection
Unlimited: the last hotplate programmed remains selected.*
‹
Limited: The hotplate will only remain selected for 10 seconds.
‚
Return to basic settings
™‹
Personal settings.*
‹
Return to factory settings.
‚
*Factory settings
**The maximum power of the hob depends on the configuration of the installation's connection current. To not exceed this maximum
value, the hob includes a series of components that automatically control the power, distributing it between the hotplates in use
as required.
,
symbol and the residual
"
‰
15