Siemens EH...MN SERIES 사용 설명서 - 페이지 9

{카테고리_이름} Siemens EH...MN SERIES에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH...MN SERIES 20 페이지.
Siemens EH...MN SERIES에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

Siemens EH...MN SERIES 사용 설명서

Frying function

This function is used for frying, automatically regulating the
temperature of the pan.
The hotplates equipped with this function are on the right side
or lower right-hand side, depending on the model, (see image).
Deep-frying features
The hotplate only heats when necessary. This way energy is
saved. The oil and fat do not overheat.
Notes
Never leave oil or fat cooking unattended.
Place the pan at the centre of the hotplate. Ensure that the
base of the pan is the right diameter.

Temperature settings

Power level
Temperature
high
max
medium-high
med
medium-low
low
low
min

How to program

Check the suitable temperature setting in the table. Place the
pan on the hotplate.
The hob must be switched on.
Select the hotplate and press the
1.
lights up on the hotplate display.
The possible temperature settings are displayed on the
programming zone.
Suitable for
e.g., potato pancakes, sautéed potatoes, and rare beefsteak.
e.g., thin fried foods like frozen pies, escalopes, ragu, vegetables
e.g. thick fried food such as hamburgers and sausages, fish.
e.g. omelettes, using butter, olive oil or margarine
symbol. The
indicator
~
'
Do not cover the pan with a lid. Doing so will cause the
automatic regulation not to function. A protective screen may
be used without affecting the automatic regulation
Only use oil which is suitable for frying. If using butter,
margarine, olive oil or pork lard, select the min temperature
setting.

Pans to use with the frying function

There are pans suited to this function which may be purchased
later as optional accessories, in specialised stores, or through
our Technical Assistance Service. Always indicate the related
reference code.
HZ390210 small pan (15 cm in diameter).
HZ390220 medium pan (19 cm)
HZ390230 large pan (21 cm)
The pans are non-stick. Food may also be fried in a small
amount of oil.
The temperature settings shown below have been specially
adjusted for these types of pans.
Note: If a different type of pan is used, try it first at the lowest
temperature, adjusting it as required. The pans may overheat.
Within the next 10 seconds, select the desired temperature
2.
setting in the programming zone.
The frying function will have been activated. The temperature
indicator
stays switched on until the frying temperature is
p
reached. A signal then sounds and the temperature symbol
turns off.
Note: To display the temperature indicators
temperature setting, the hotplate must be selected.
After reaching the temperature setting, add oil to the pan and
3.
then the ingredients.
Turn the food over to avoid burning.
Turning off the deep-frying function
Set to 0 in the programming panel.
and
p
9