Siemens EH..TA11E 사용 설명서 - 페이지 8
{카테고리_이름} Siemens EH..TA11E에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH..TA11E 12 페이지.
페이지 인쇄
Residual heat warning light
The hob has a residual heat warning light for each
hotplate to show those which are still hot. Avoid touching
the hotplate when this warning light is on.
Although the hob is switched off, the warning light will
stay lit while the hotplate is hot.
When the pan is removed before the hotplate is turned
off, the s/t indicator and the selected heat setting will be
displayed alternately.
Programming the hob
Switching the hob on and off
To switch on:
touch the # symbol. The indicator above the main switch
lights up.
To switch off:
touch the # symbol until the indicator above the main
switch goes out. All hotplates are switched off. The
residual heat indicator remains on until the hotplates have
cooled down sufficiently.
Note
The hob switches off automatically if all hotplates have
been switched off for more than 20 seconds.
Adjusting the hotplate
The hotplate must be connected.
1
Press the + or - symbol on the required hotplate.
0 appears on the hotplate display.
2
In the following 5 seconds, press the
+ or - symbol.The basic setting appears:
+ symbol = heat setting 9
- symbol = heat setting 4
3
To change the heat setting: press the
+ or - symbol until the required heat setting is
displayed.
8
Warning:
The selected heat setting will flash if no pan is placed on
the induction hotplate.
After a certain time, the hotplate switches off.
Switching off the hotplate
Press the + or - symbol until 0 is displayed.
Childproof lock
The cooktop can be protected against being accidentally
turned on to ensure that children do not switch on the
elements.
Switching the childproof lock on and
off
The hob must be switched off.
To switch on: touch the
@
4 seconds. The @ symbol lights up for 10 seconds. The
hob is locked.
@
To switch off: touch the
4 seconds. The hob is unlocked.
Automatic childproof lock
This function automatically activates the childproof lock
every time you switch the hob off.
Switching on and off
You can find out how to switch the automatic childproof
lock on and off in the Basic settings section.
Timer function
This function can be used in two different ways:
to switch a hotplate off automatically
D
as a cooking timer
D
Switching a hotplate off automatically
Enter the time period for the required hotplate. The
hotplate will switch off automatically once this time has
elapsed.
It is programmed as follows
The hotplate must be connected.
1
Select the hotplate and heat setting required. Then
press the j symbol.
The 00 and
indicators light up on the time
min
program function display.
The ? indicator lights up on the hotplate.
symbol for approximately
symbol for approximately