Siemens EH6..MV1.. series 사용 설명서 - 페이지 11
{카테고리_이름} Siemens EH6..MV1.. series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH6..MV1.. series 16 페이지.
페이지 인쇄
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
The hotplate stops heating. On the hotplate display,
flash alternately.
Cleaning lock function
Cleaning the control panel while the hob is on may change the
settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
symbol. A signal sounds. The control panel is
#
Basic settings
The device has several basic settings. These settings may be
adapted to the user's individual needs.
Indicator
Function
Childproof lock
™‚
Deactivated.*
‹
‚
Activated.
™ƒ
Sound signals
‹
Confirmation beep and error signal deactivated.
‚
Only confirmation beep deactivated.
All signals activated.*
ƒ
™†
Automatic timer
Switched off.*
‹
‚
-
ŠŠ
Automatic shut-off time.
Duration of the time program function warning signal
™‡
‚
10 seconds*.
30 seconds.
ƒ
„
1 minute.
Power-Management function
™ˆ
‹
= Deactivated.*
= 1,000 W. minimum power.
‚
‚
= 1,500 W.
= 2,000 W.
ƒ
etc.
or
. = maximum power of the hob.
Š
Š
Hotplate time selection
™Š
Unlimited: the last hotplate programmed remains selected.*
‹
‚
Limited: The hotplate will only remain selected for 10 seconds.
™‹
Return to basic settings
‹
Personal settings.*
Return to factory settings.
‚
*Factory settings
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
and
selected power level (from 1 to 10 hours).
"
‰
locked for 35 seconds. The surface of the control panel can
now be cleaned without risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
11