Siemens EH6..TA1 series 사용 설명서 - 페이지 7
{카테고리_이름} Siemens EH6..TA1 series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH6..TA1 series 16 페이지.
Siemens EH6..TA1 series에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지), 설치 및 사용 설명서 지침 (16 페이지)
페이지 인쇄
Characteristics of the pan base
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
&RQWURO
VXUIDFH IRU
VZLWFK
VXUIDFH IRU
VHOHFWLRQ RI
Control surfaces
Pressing a symbol activates its corresponding function.
The hotplates
Hotplate
Single hotplate
$
Hotplate
æ
Resistive plate-warming zone*
q
* Activating the hotplate: The corresponding indicator lights up.
** The residual heat warning light comes on.
Use only cookware suitable for induction cooking; see the section on suitable cookware.
PDLQ
&RQWURO VXUIDFH IRU
# FKLOGSURRI ORFN
&RQWURO
SRZHU
OHYHO
Switching on and off
Always use cookware of a suitable size.
This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
Press the
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
&RQWURO VXUIDFHV
IRU
WLPH SURJUDP
IXQFWLRQ
Notes
The settings will not change if several symbols are pressed at
■
the same time. This enables the programming zone to be
cleaned when food is spilt.
Always keep the control surfaces dry. Moisture can affect
■
proper functioning.
Ù
symbol.**
,QGLFDWRUV IRU
SRZHU OHYHO³É
IXQFWLRQDOLW\ ¯
UHVLGXDO KHDW ¤
SRZHUERRVW °
&RQWURO VXUIDFH
IRU
Ä SODWHZDUPLQJ ]RQH
7