Siemens EH7 MD2 Series 사용 설명서 - 페이지 13
{카테고리_이름} Siemens EH7 MD2 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH7 MD2 Series 16 페이지.
Siemens EH7 MD2 Series에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)
페이지 인쇄
Automatic time limitation
If the hotplate remains in use for a long time and no changes
are made in the settings, the automatic time limitation function
is triggered.
Cleaning protection
Cleaning the control panel while the range is on may change
the settings.
In order to avoid this, the range has a cleaning protection
function. Press the
control panel is locked for 35 seconds. The surface of the
Basic settings
The device has several basic settings. These settings may be
adapted to the needs of the user.
Indicator
Function
Childproof lock
Off.*
On.
Beeps
Most signals deactivated.
Some beeps deactivated.
All beeps activated.*
Automatic timer
Switched off.*
-
Duration of the time program function warning signal
10 seconds*.
30 seconds.
1 minute.
Power-Management function
= Deactivated.*
= 1,000 W minimum power.
. = 1,500 W.
= 2,000 W.
etc.
or
Hotplate time selection
Unlimited: the last hotplate programmed remains selected.*
limited: The hotplate will only remain selected for 10 seconds.
Return to default settings
Personal settings.*
Return to factory settings.
*Factory settings
EURO Appliances - euappliances.info
symbol. An audible signal sounds. The
Automatic shut-off time
. = maximum power of the hob.
The hotplate stops heating. On the hotplate display,
flash alternately.
The indicator goes out when any symbol is pressed. The
hotplate can now be reset.
When the automatic time function is used, it is governed by the
selected power level (from 1 to 10 hours).
control panel can now be cleaned without risk of changing the
settings.
Note: The lock does not affect the main switch. The range may
be switched off when desired.
and
13