Siemens EH8 Series 사용 설명서 - 페이지 8

{카테고리_이름} Siemens EH8 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH8 Series 20 페이지. Full surface induction cooktop
Siemens EH8 Series에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지), 사용 설명서 (20 페이지)

페이지 인쇄

Scroll function

With the scroll function, you can change different adjustment

values such as power levels, cooking duration and time, as well

as other values in the Options menu.

First select the value you wish to adjust. Then touch the display

area and slide your finger up or down.

[

Setting the cooktop

This section informs you how to set the cooking positions. The

settings table shows power levels and cooking times for

various meals.

Switching the cooktop on and off

Use the main switch to switch the cooktop on and off.

To switch on: touch the

main switch lights up. After a short activation time, the cooktop

is ready for operation.

To switch off: touch the

switches off. All cooking positions are switched off. Hibernate

mode is activated. See section Hibernate mode.

The heat indicator remains lit until the cooking positions have

cooled down sufficiently.

Note: The cooktop switches off automatically if all cooking

positions have been switched off for more than 60 seconds

and you do not make any settings on the touch display.

Hibernate mode

As soon as you switch off the hob, Hibernate mode is activated

for a set duration. The lamp above the main switch flashes.

Only after this duration has passed does the hob switch off

completely. During Hibernate mode, you can switch the

appliance on again using the main switch. The appliance is

immediately ready for use.

Note: To find out how to change the duration of the Hibernate

mode, see section Options menu.

Setting a cooking position

Use the scroll function to set the desired power level.

Power level 1.0

= Lowest power

Power level 9.0

= Highest power

Each power level has an intermediate level. This is identified

with x.5.

Note: To find out how to deactivate the intermediate levels, see

section Options menu.

symbol. The indicator above the

symbol. The indicator in the display

Residual heat indicator

The hob has a residual heat indicator which shows whether the

cooking surface is still hot or warm. Do not touch the cooking

surface with this indicator. Even if the hob is already off, the

display will stay lit for as long as the cooking surface is still hot.

Setting the power level

The cooktop must be switched on.

Place cookware on the cooking surface.

Touch the

symbol of the cooking position in the display.

0.0 lights up in the display.

In the next 4 seconds, slide your finger up and set the

desired power level.

[

Switching off the cooking position

Slide your finger down until 0.0 appears. The cooking position

switches off and appears as a detected cooking position after

approx. 4 seconds.

[