Siemens EH8..ML2 series 사용 설명서 - 페이지 6

{카테고리_이름} Siemens EH8..ML2 series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EH8..ML2 series 16 페이지.
Siemens EH8..ML2 series에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

Induction cooking

Advantages of induction cooking

Induction cooking represents a radical change from the

traditional method of heating; the heat is generated directly in

the pan. It therefore offers a number of advantages:

Time savings for cooking and frying; since the pan is heated

■

directly.

Energy is saved.

■

Care and cleaning are simpler. Foods that have spilt do not

■

burn as quickly.

Heat and safety control; the hob supplies or cuts off power

■

immediately when the control knob is turned on. The

induction hotplate stops supplying heat if the pan is removed

without having previously switched it off.

Suitable pans

Ferromagnetic pans

Only ferromagnetic pans are suitable for induction cooking,

these may be made from:

enamelled steel

■

cast iron

■

special cutlery for stainless steel induction pan

■

To determine whether a pan is suitable, check to see if a

magnet will stick to it.

Special induction pans

There is another type of pan specially made for induction, the

base of which is not entirely ferromagnetic. Check the diameter,

since this could affect detection of the pan, as well as the

cooking results.

Unsuitable pans

Never use pans made from:

common thin steel

■

glass

■

earthenware

■

copper

■

aluminium

■

Characteristics of the pan base

The characteristics of the pan base may affect the uniformity of

the cooking results. Pans made from materials which help

diffuse heat, such as stainless steel sandwich pans, distribute

heat uniformly, saving time and energy.

Absence of pan or unsuitable size

If no pan is placed on the selected hotplate, or if it is made of

unsuitable material or is not the correct size, the power level

displayed on the hotplate indicator will flash. Place a suitable

pan on the hotplate to stop the flashing. If this takes more than

90 seconds, the hotplate will switch off automatically.

Empty pans or those with a thin base

Do not heat empty pans, nor use pans with a thin base. The

hob is equipped with an internal safety system. However, an

empty pan may heat up so quickly that the "automatic switch

off" function may not have time to react and the pan may reach

very high temperatures. The base of the pan could melt and

damage the glass on the hob. In this case, do not touch the

pan and switch the hotplate off. If it fails to work after it has

cooled down, please contact the Technical Assistance Service.

Pan detection

Each hotplate has a minimum limit for detecting pans, which

varies depending on the material of the pan being used. You

should therefore use the hotplate that is most suitable for the

diameter of your pan.

Double or triple hotplate

These hotplates can detect pans of different sizes. Depending

on the material and properties of the pan, the hotplate will

adapt automatically, switching on part or all of the hotplate and

supplying sufficient power to obtain good cooking results.