Siemens EI6..TB11 SERIES 사용 설명서 - 페이지 6

{카테고리_이름} Siemens EI6..TB11 SERIES에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens EI6..TB11 SERIES 12 페이지.

Hotplate

Resistive plate-warming plate*

* Turning on the hotplate: The corresponding indicator lights up. Once this has been activated, you do not need to have any other

hotplate switched on.

** The residual heat warning light comes on.

Only use pans suitable for induction cooking, see the "Appropriate cookware" section.

Residual heat indicator

The hob has a residual heat indicator for each hotplate to show

those which are still hot. Avoid touching a hotplate that displays

this.

Programming the hob

This section will show you how to program the hotplates. The

table contains power levels and cooking times for several

dishes.

Switching the hob on and off

The hob is turned on and off using the controls.

When the hob is switched on, the power level display lights up.

Set the hotplate

Use the controls to set the desired power level.

0 = hotplate switched off.

Power level 1 = minimum power.

Power level 9 = maximum power.

Each power level has an intermediate setting. This is marked

with a dot.

Cooking guidelines

The table below contains some examples.

The cooking times depend on the power level, type, weight and

quality of the food. As such they are approximate.

Power levels influence the cooking results.

Melt

Chocolate, chocolate coating, butter, honey

Gelatine

Heating and warming

Stew (e.g., lentils)

Milk**

Sausages heated in water**

* Continue cooking without a lid

** Uncovered

Turning on and off

To turn on: switch on a hotplate. Press the

Then press the

symbol.

To turn off: press the

Even when switched off, the

the hotplate remains hot.

If the pan is removed before the hotplate is turned off the

indicators and the selected power level will appear alternately.

Selecting the power level

Turn the control to the right until reaching the desired powered

level.

The selected power level lights up on the indicator.

Switch off the hotplate

Turn the control to the left until reaching level 0. The hotplate

turns off and the residual heat indicator appears.

Note: If no pan has been placed on the induction hotplate, the

selected power level flashes. After a certain time, the hotplate

switches off.

Remove purées, creams and thick sauces from time to time, if

they get too hot.

Use power level 9 to begin cooking.

symbol, the

symbol.**

•

light will remain on as long as

Ongoing cooking

setting

1-1.

1-2

1.-2.

3-4

indicator lights up.

•

Ongoing cooking time

in minutes