Cisco 7945G - Unified IP Phone VoIP 빠른 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 7945G - Unified IP Phone VoIP에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7945G - Unified IP Phone VoIP 15 페이지. Unified ip phone
Cisco 7945G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 설치 준비 (17 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (23 페이지), 설치 매뉴얼 (19 페이지), 빠른 매뉴얼 (12 페이지), 관리자 매뉴얼 (6 페이지), 매뉴얼 (9 페이지), 빠른 참조 매뉴얼 (3 페이지), 문제 해결 및 유지 관리 (25 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄
Cisco 7945G - Unified IP Phone VoIP 빠른 매뉴얼

Choosing Phone Screen Items

There are different ways to choose items on your phone's screen.
To choose a phone
screen item...
By touch
(Cisco Unified
IP Phone 7975G,
7971G-GE, and
7970G only)
By item number
By scrolling

Cleaning and Maintaining the Phone Screen

Cisco Unified IP Phone 7975G, 7971G-GE, and 7970G
Use only a soft, dry cloth to wipe the touchscreen. Do not use any liquids or powders on the phone,
because they can contaminate phone components and cause failures.
Use the Display button
illuminates to indicate changes in touchscreen status:
Green, steady—Touchscreen is in power save mode
Green, flashing—Touchscreen is disabled
If you want to...
Disable the touchscreen
for cleaning
Enable the touchscreen
(after disabling it)
Wake the touchscreen
from power save mode
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
Do this...
Press (or tap) touch-sensitive items on the touchscreen with your fingertip.
Use only your fingertip to press the touchscreen, as using any other objects
could damage the display. Be aware that pressing a phone number can cause the
phone to dial the number.
Press the corresponding number on your keypad. For example, press 4 to
choose the fourth item in a menu.
Use the Navigation button to highlight an item. Press the Select button to select
the item, or a softkey to finish the action.
to disable and enable the touchscreen for cleaning. The Display button
Then...
Press
and hold for more than one second.
The screen remains disabled for about a minute, unless you enable it.
Press
(flashing) and hold for more than one second.
Press the touchscreen or any button, or lift the handset.
After a period of inactivity (determined by your system administrator),
the touchscreen enters the power save mode to save power. In this mode,
the touchscreen appears blank and the Display button
An Overview of Your Phone
flashes.
remains lit.
9