Epson BrightLink 685Wi 설정 매뉴얼 - 페이지 14

{카테고리_이름} Epson BrightLink 685Wi에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 685Wi 43 페이지.
Epson BrightLink 685Wi에 대해서도 마찬가지입니다: 여기에서 시작하기 매뉴얼 (6 페이지)

페이지 인쇄

Configuring Projector Settings for Multiple Projectors

Follow the instructions in these sections to set up multiple projectors for use as a DuoLink system.

Note: Turn on one of the projectors, and then perform all of the configuration tasks listed here. Turn the

projector off, then turn on the second projector and perform the configuration tasks on that projector.

Enabling Multi-Projection

Projector Identification System for Multiple Projector Control

Matching Images for Multiple Projectors

Pen Calibration

Calibrating for Finger Touch Interactivity

Enabling Multi-Projection

You must enable the Multi-Projection settings on both projectors to set them up for DuoLink.

1. In the Extended menu, set the Easy Interactive Function > Advanced > Sync of Projectors

setting to Wired.

2. Set the Wired Sync Mode setting to Mode 1.

3. Make sure the Distance of Projectors setting is set to Mode 1

4. Select the Multi-Projection setting and set it to Left or Right based on the position of the projector.

5. Press Esc and make sure the Pen Operation Mode setting is set to Windows/Mac Mode.

6. Press Esc again and make sure the USB Type B setting is set to Easy Interactive Function.