Epson BrightLink 695Wi 시작하기 - 페이지 3
{카테고리_이름} Epson BrightLink 695Wi에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 695Wi 6 페이지.
Epson BrightLink 695Wi에 대해서도 마찬가지입니다: 설정 매뉴얼 (43 페이지)
페이지 인쇄2
Interacting With the
Screen
Interactive Pens
Your projector came with 2 pens, one orange (Interactive
Pen A) and one blue (Interactive Pen B).
The pens have two different types of tips: a soft, felt tip
and a hard tip. Make sure one AA battery is installed in
each pen.
Pen tip
(unscrew to replace)
Battery
light
• To turn on the pen, pick it up. The blue light comes on
briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown
below.
• When you are finished using the pen, simply place it in
an area away from the projection screen.
Note: The pens turn off automatically after about
15 seconds of inactivity. Pick the pen up to turn it
back on.
Finger Touch
You can use your finger to perform the same functions as
the interactive pen when the Touch Unit is installed. You
can use either the pen or your finger, or use both at the
same time.
When performing finger touch operations, you can use
two fingers in annotation and whiteboard modes, or up to
six fingers in computer interactive mode.
Battery cover
Button
Using Your Pen or Finger as a Mouse
When you are in computer interactive mode, you can use
the pen or your finger as a mouse to interact with your
computer desktop.
Mouse function
Pen/finger action
Left-click
Tap on board
Double-click
Tap twice
Press pen button
Right-click
Tap and hold finger for
3 seconds
Move cursor
Hover over board
Click and drag
Tap and hold on item, then drag
If your device supports these functions, you can also do
the following:
• To zoom in or out, touch an item using two fingers and
either move your fingers away from each other (zoom
in) or toward each other (zoom out).
• To rotate an image, touch the image with two fingers
and then rotate your hand.
• To scroll up or down on a page, or move backward or
forward in a browser window, use swiping gestures or
flicks.
See the online BrightLink User's Guide for more
information.
Having Trouble?
If the cursor does not match your pen or finger location,
follow the calibration instructions on the back of this card.