Epson BrightLink 695Wi 설정 매뉴얼 - 페이지 16
{카테고리_이름} Epson BrightLink 695Wi에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 695Wi 43 페이지.
Epson BrightLink 695Wi에 대해서도 마찬가지입니다: 시작하기 (6 페이지)
페이지 인쇄Projector Identification System for Multiple Projector Control
You can operate multiple projectors using one remote control for more elaborate presentations. To do
this, you assign an identification number to each projector and to the remote control. Then you can
operate all the projectors at once or individually.
Setting the Projector ID
Setting the Remote Control ID
Parent topic:
Setting the Projector ID
If you want to control multiple projectors from a remote control, give each projector a unique ID.
1. Press the Menu button.
2. Select the Extended menu and press Enter.
3. Select the Multi-Projection setting and press Enter.
4. Select Projector ID and press Enter.
5. Press the arrow buttons on the remote control to select the identification number you want to use for
the projector. Then press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button
to temporarily display the projector's ID on the screen.
Configuring Projector Settings for Multiple Projectors
16