Cisco 7960G - IP Phone VoIP 매뉴얼 - 페이지 25

{카테고리_이름} Cisco 7960G - IP Phone VoIP에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7960G - IP Phone VoIP 35 페이지. Configuring sip ip telephony using avaya converged communications server, avaya communication manager and cisco 7940/7960 sip telephones
Cisco 7960G - IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (15 페이지)

페이지 인쇄
Cisco 7960G - IP Phone VoIP 매뉴얼
Steps
3.
The Add Address Map page will be displayed. Specify a Name for the address map, and the
Pattern match specification. In this example, all FNEs begin with 70. The pattern match
specification is applied to the Uniform Resource Identifier (URI) field of incoming INVITE
messages. The URI usually takes the form sip:user@domain, where domain can be a domain
name or an IP address. For example, the URI for the Call Pickup FNE could be
The specification means that if the URI begins with "sip:" followed by either a 2, 7, or 9, route
the call to the Media Server. In the sample configuration, this would cover extension, Outboard
Proxy SIP FNE, and outbound dialing, respectively. Check Replace URI. When routing the
incoming INVITE from the phone, the Converged Communications Server will replace the
request URI with the URI specified in the contact (see Step 4).
Click on Add; then click on Continue on the confirmation page.
FAS; Reviewed:
WCH 10/22/2004
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
Description
25 of 35
Cisco7960SIP.doc