Epson BrightLink 710Ui 설정 매뉴얼 - 페이지 18

{카테고리_이름} Epson BrightLink 710Ui에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink 710Ui 43 페이지.

Matching Images for Multiple Projectors

You can adjust the projectors' images to minimize any differences in brightness or color. Use these

sections to adjust the image settings for each projector.

Before adjusting the images, make sure you have used the Geometry Correction settings to align the

projected images, and that both projectors are in the same Color Mode. In most cases, use the

Presentation color mode for DuoLink installations.

To change the Color Mode setting, press the Menu button and select the Extended > Multi-Projection

> Color Mode setting.

Adjusting the Projector's Brightness Level

Matching the Image Colors

Adjusting RGBCMY

Parent topic:

Adjusting Color Uniformity

If the color tone is uneven on each screen, adjust the color tone balance in the Extended menu of each

projector. (The color tone may not be uniform even after performing color uniformity.)

Note: If you cannot adjust color uniformity, make sure the Color Mode setting is not set to Dynamic.

1. Press the Menu button on the remote or control panel, select the Extended menu, and press Enter.

Configuring Projector Settings for Multiple Projectors