Epson BrightLink Pro 1410Wi 빠른 참조 매뉴얼 - 페이지 3
{카테고리_이름} Epson BrightLink Pro 1410Wi에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink Pro 1410Wi 6 페이지. Quick reference
Epson BrightLink Pro 1410Wi에 대해서도 마찬가지입니다: 제품 사양 (6 페이지), 적합성 선언 (4 페이지), 보충제 (1 페이지)
페이지 인쇄
2 Using the Pens and the Control Pad
The projector came with 2 pens that have different
colored ends, orange and blue. Make sure one AA
battery is installed in each pen.
Turn projector on/off
Capture the projected image
(switch to whiteboard to
paste the captured image)
Connect USB cable from
computer (on bottom of
control pad)
Battery light
Power switch
Print the
projected image
•
T o turn on the pen, slide the power switch. The
green light comes on briefly. If the battery is low, the
light flashes.
•
H old the pen perpendicular to the board, as shown
below. Do not cover the black section of the pen.
Note: The pens turn off automatically after about 20
minutes of inactivity. Slide the switch to turn the pen
back on.
Connect USB thumbdrive
Remove the top cover to install
batteries or connect the control pad
to the projector or to a printer. See
the online User's Guide for more
information.
Select whiteboard mode (turns on
the projector if it is off)
Select from various image sources
connected to the projector
Save the projected image