Epson BrightLink Pro 1430Wi 시작하기 - 페이지 3
{카테고리_이름} Epson BrightLink Pro 1430Wi에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink Pro 1430Wi 6 페이지. Control pad and touch unit
Epson BrightLink Pro 1430Wi에 대해서도 마찬가지입니다: 설치 매뉴얼 (26 페이지)
페이지 인쇄Open content from a USB or network drive
1
Insert a USB flash drive in the
control pad (or use a networked
drive).
Save your notes or share them via email
1
Tap the Mail or Save icon on the
bottom toolbar.
Control Pad functions
Remove the top cover to install batteries
or connect the Control Pad to the
projector or to a printer. See the online
User's Guide for more information.
Turn projector on/off
Capture the projected image
(switch to whiteboard mode to
paste the captured image)
Connect USB cable to computer
(on bottom of Control Pad)
2
Tap the Insert Image icon to
select and display a JPG, PNG,
EWF, or PDF page.
2
Select the necessary settings.
3
Use the interactive pen or your
finger to add notes.
3
Tap Save to save your notes or
Send to send the email.
Select whiteboard mode (and turns
on the projector if it is off)
Select from various image sources
connected to the projector
Save the projected image
Print the projected image
Connect USB flash drive