Epson BrightLink Pro 1430Wi 설치 매뉴얼 - 페이지 11
{카테고리_이름} Epson BrightLink Pro 1430Wi에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson BrightLink Pro 1430Wi 26 페이지. Control pad and touch unit
Epson BrightLink Pro 1430Wi에 대해서도 마찬가지입니다: 시작하기 (6 페이지)
페이지 인쇄2. Slide the dial cover down to remove it.
3. Remove the two markers from inside the Touch Unit.
Use the markers to perform the angle adjustment (p. 14) after installing the Touch Unit.
D
Determine the installation position for the Touch Unit
Mark the following installation positions:
•
(
): The center line of the installation pattern; align it with the center line of the Touch Unit (
•
(
): 1 inch (25 mm) from the top edge of the projected image; align with the bottom edge of the
Touch Unit.
The Touch Unit must be installed above the image area.
1.0 in. (25 mm)
).