Epson CPD-17904 사용자 설명서 - 페이지 27

{카테고리_이름} Epson CPD-17904에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CPD-17904 48 페이지. Epson powerlite home 10 projector cpd-17904

Cleaning and Replacing the Air Filter

Clean the air filter on the bottom of the projector after every 100 hours of use. If it's not

cleaned periodically, it can become clogged with dust, preventing proper ventilation. This can

cause overheating and damage the projector.

1. Turn off the projector and wait for the P power light to stop flashing.

2. Unplug the power cord and disconnect any cables.

3. Turn the projector over. Then use a small vacuum

cleaner designed for computers and other office

equipment to clean the filter, as shown. If you don't have

one, gently clean the filter using a very soft brush (such

as an artist's camel-hair brush).

If the dirt is difficult to remove or the filter is broken,

replace it. Contact your dealer or call Epson at (800)

873-7766 and ask for part number

Canada, call (800) 463-7766 for dealer referral.

4. If you need to replace the filter, press the tab in and lift the

cover up.

5. Remove the old filter and replace it with a new one.

6. To replace the cover, insert the tabs and press down until the

cover clicks into place.

. In

V13H134A04