Epson CPD-17904 사용자 설명서 - 페이지 30

{카테고리_이름} Epson CPD-17904에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson CPD-17904 48 페이지. Epson powerlite home 10 projector cpd-17904

Resetting the Lamp Timer

1. Press the

2. Highlight the

3. Select

Lamp Hours Reset

4. When you see a prompt asking whether you want to execute the command, highlight

and press the

5. When you're finished, press

The lamp usage timer doesn't register until you've used the lamp for at least 10 hours.

If you need to store the projector for awhile, do the following:

Make sure the temperature and humidity of the storage area are within the recommended

range for the projector (14 to 140 °F [-10 to 60 °C] and 10 to 90% relative humidity).

Attach the lens cover and retract the feet.

Remove the battery from the remote control.

Package the projector in its original packaging or equivalent (as described in the following

section).

Note: Epson shall not be liable for any damages incurred during transportation.

The projector contains many glass and precision parts. If you need to transport it, follow these

guidelines to prevent damage:

When shipping the projector for repairs, use the original packaging material if possible. If

you do not have the original packaging, use equivalent materials, placing plenty of

cushioning around the projector. Be sure the carrier is capable of transporting fragile

equipment and is aware that the projector is fragile.

When you are hand-carrying the projector, use the recessed hand grips on the sides.

button on the projector or remote control.

menu and press the

Reset

button.

Select

Esc

button.

Select

Yes