Cisco 7962G - Unified IP Phone VoIP 사용자 설명서 - 페이지 4

{카테고리_이름} Cisco 7962G - Unified IP Phone VoIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7962G - Unified IP Phone VoIP 12 페이지. Unified communications manager 9.0 (sccp and sip)
Cisco 7962G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (23 페이지), 데이터시트 (5 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (4 페이지), 사양 (5 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (6 페이지), 관리 매뉴얼 (16 페이지), 문제 해결 및 유지 관리 (27 페이지)

Adjusting the Handset Rest

When you connect your phone, you can adjust the handset rest so that the receiver does not slip out of the cradle. To

adjust the handset:

1. Set the handset aside and pull the square plastic tab from the handset rest.

2. Rotate the tab halfway.

3. Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab. Return the handset to the

handset rest.

This section describes how to operate your Cisco IP pho ne and includes information on soft keys and phone features.

Note

Because there are differences in phone and site configura tions, not all features described here will apply to your

phone. Consult your system administrator for more information.

Your Cisco IP phone is equipped with soft keys for call features and options. Soft keys are displayed along the bottom

of the LCD screen and activated using the corresponding buttons. Soft keys can change according to the state of the

phone . Following is a comprehensive list of soft keys offered. Functions and availabily depend on your system

configura ion.

Soft Key

<< or >>

Answer

Cancel

CFwdALL

Clear

Confrn

Function

Navigates to edit characters. Use the backspace soft key to erase digits that you entered

incorrectly .

Answers an incoming call.

Cancels the last selection.

Forwards all calls.

Clears directory history.

Connects callers to a conference call.