Cisco Unified IP Phones Installation
Set up Additional Buttons
To configure the 48 additional buttons, follow these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Button Template.
Step 2
Click the Add New button.
Step 3
From the drop-down list, choose a template and click Copy.
Step 4
Rename the new template.
Step 5
Update the template to 56 Directory Numbers for Cisco Unified IP Phone 7975G, or 54 Directory Numbers
for Cisco Unified IP Phone 7965G.
See the Cisco Unified Communications Manager Administration Guide and the Cisco Unified Communications
Manager System Guide for more information about template creation and modification.
Note
Footstand Adjustment
The Cisco Unified IP Phone includes an adjustable footstand. When you place the phone on a desktop surface,
you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60 degrees. You
can also mount these phones to the wall by using the footstand or by using the optional locking wall mount
kit.
To adjust the footstand, push in the footstand adjustment button and adjust the tilt.
Phone Cable Lock
You can secure the Cisco Unified IP Phones to a desktop with a laptop cable lock. The lock connects to the
security slot on the back of the phone, and the cable can be secured to a desktop.
The security slot can accommodate a lock that is up to 20 mm wide. Compatible laptop cable locks include
the Kensington laptop cable lock and laptop cable locks from other manufacturers that can fit into the security
slot on the back of the phone.
You can also attach two Cisco Unified IP Phone Expansion Modules 7915 units or two Cisco Unified
IP Phone Expansion Modules 7916 units to provide 48 additional lines or speed dial and feature
buttons.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Footstand Adjustment
Communications Manager 9.0 (SCCP and SIP)
11
페이지 인쇄