Cisco 7970G - IP Phone VoIP 설치 매뉴얼 - 페이지 16

{카테고리_이름} Cisco 7970G - IP Phone VoIP에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7970G - IP Phone VoIP 19 페이지. Unified ip phones
Cisco 7970G - IP Phone VoIP에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 설치 준비 (17 페이지), 문제 해결 및 유지 관리 (25 페이지)

Cisco 7970G - IP Phone VoIP 설치 매뉴얼

Network Settings

If the phone successfully passes through these stages, it has started up properly. If the phone does not start
up properly, see
Network Settings
If you are not using DHCP in your network, you must configure these network settings on the
Cisco Unified IP Phone after you install the phone on the network:
• IP address
• IP subnet information (subnet mask for IPv4 and subnet prefix length for IPv6)
• Default gateway IP address
• TFTP server IP address
You may also configure these optional settings as necessary:
• Domain name
• DNS server IP address
Related Topics
Cisco Unified IP Phone settings

Cisco Unified IP Phone Security

The security features protect against several threats, including threats to the identity of the phone and to data.
These features establish and maintain authenticated communication streams between the phone and the
Cisco Unified Communications Manager server, and digitally sign files before they are delivered.
For more information about the security features, see Cisco Unified Communications Manager Security Guide.
Related Topics
Cisco Unified IP Phone Security Features

Install Locally Significant Certificate

You can initiate the installation of a Locally Significant Certificate (LSC) from the Security Configuration
menu on the phone. This menu also lets you update or remove an LSC.
Make sure that the appropriate Cisco Unified Communications Manager and the CAPF security configurations
are complete:
• The CTL or ITL file should have a CAPF certificate.
• On Cisco Unified Communications Operating System Administration, verify that the CAPF certificate
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
16
• Softkeys
Startup
Problems.
has been installed.
Cisco Unified IP Phones Installation