© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Table 3.
Temperature Ratings
Temperature Variable
Operating Temperature
Relative Humidity
Storage Temperature
Certifications—Compliance and Safety
Refer to the following link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/iphrcsi3.htm.
Ordering Information
To place an order, visit the
Software
Center.
Table 4.
Ordering Information—Phone/license
Part Number
CP-7975G
CP-7975G=
CP-7975G-CH1
CP-7975G-CCME
Note:
All Cisco Unified IP phones require the purchase of a phone technology license,
regardless of call protocol being used.
Table 5.
Ordering Information—Accessories
Part Number
CP-7914=
CP-LCKNGWALLMOUNT=
CP-WALLMOUNTKIT=
CP-LCKNGWALLMNT2=
CP-PWR-CUBE-3=
CP-PWR-INJ=
Table 6.
Ordering Information—AC Country Power Cords
Part Number
CP-PWR-CORD-AP=
CP-PWR-CORD-AR=
CP-PWR-CORD-AU=
CP-PWR-CORD-CE=
CP-PWR-CORD-CN=
CP-PWR-CORD-JP=
CP-PWR-CORD-NA=
CP-PWR-CORD-SW=
CP-PWR-CORD-UK=
Description
32 to 104° F (0 to 40° C)
10 to 95% (noncondensing)
14 to 140° F (–10 to 60° C)
Cisco Ordering Home
Page. To download software, visit the
Description
Cisco Unified IP Phone 7975G
Cisco Unified IP Phone 7975G, spare
Cisco Unified IP Phone 7975G, for Channels, with one station user license
Cisco Unified IP Phone 7975G, for Channels, with one Cisco Unified Communications
Manager Express station user license
Description
14-button expansion module. Up to two modules may be used.
Locking wall-mounting kit, flat (recommended version)
Nonlocking wall-mounting kit, slanted
Locking wall-mounting kit, slanted
Local power adapter for sites where PoE is not available; refer to Table 6 to select the
correct regional power cord. CP-PWR-CUBE-3= is compatible with and can replace CP-
PWR-CUBE-2=.
Single-port midspan power injector with integrated power supply, specifically designed and
tested for use with all Cisco Unified IP Phones. May be used as an alternative to the existing
Cisco phone local power adapter (CP-PWR-CUBE-3=), and can support a maximum
distance of 100 meters between an unpowered switch and a Cisco Unified IP Phone.
Description
Asia Pacific
Argentina
Australia
European Community
China
Japan
North America
Switzerland
United Kingdom
Data Sheet
Cisco
Page 4 of 5
페이지 인쇄