Epson EasyMP EMP-735 운영 매뉴얼 - 페이지 42

{카테고리_이름} Epson EasyMP EMP-735에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EasyMP EMP-735 50 페이지. Esc/vp21 command user's guide for business projectors
Epson EasyMP EMP-735에 대해서도 마찬가지입니다: 사양 (1 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (25 페이지), 사용자 설명서 (28 페이지), 사용자 설명서 (28 페이지), 첫 번째 매뉴얼 읽기 (46 페이지)

페이지 인쇄

Setting, Monitoring and Controlling from a Computer

Monitoring and Control Using EMP Monitor

When the projector and a computer are connected with the wireless LAN access

point mode, it is possible to simultaneously monitor and control multiple projectors

using the EMP Monitor. It is possible for a single operator to simultaneously control

the starting and monitoring of projectors arranged in separate classrooms and

meeting rooms by using the EMP Monitor.

Use the EMP Monitor to monitor and control projectors using the following procedure.

Tip :

• A maximum of 64 projectors can be collectively monitored and controlled.

• Setup and control are possible using the EMP Monitor if "Standby Mode" is "Network

ON" in the "Advanced" menu of the projector's configuration menu, even if the

projector is in standby mode (when the Power indicator is lit orange).

• Before using the EMP Monitor, configure the network settings to establish connections

between the projectors and the computer via a wireless LAN.

Access Point Mode" in the EasyMP Setup Guide.

• The administrative function using EMP Monitor can only be used when connected via

wireless LAN in Access point mode. It cannot be used on a wireless LAN in Easy

connect mode.

In Windows, select "Start" - "Programs" (or, "All Programs") -"EMP

Monitor" - "EMP Monitor".

The EMP Monitor starts.

Click the "Resister projector" button during initial start-up after installing

the EMP Monitor, or to register additional projectors. Continue with Step

8 if all projectors are registered.

EasyMP Operation Guide

See "Connecting in