Cisco 7975G - Unified IP Phone VoIP 문제 해결 및 유지 관리 - 페이지 11

{카테고리_이름} Cisco 7975G - Unified IP Phone VoIP에 대한 문제 해결 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7975G - Unified IP Phone VoIP 25 페이지. Unified ip phone
Cisco 7975G - Unified IP Phone VoIP에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 사용자 설명서 (21 페이지), 설치 준비 (17 페이지), 사용자 지정 (11 페이지), 설치 매뉴얼 (19 페이지), 빠른 매뉴얼 (15 페이지), 설치 매뉴얼 (12 페이지), 관리자 매뉴얼 (6 페이지), 사용자 설명서 (42 페이지)

페이지 인쇄

Cisco 7975G - Unified IP Phone VoIP 문제 해결 및 유지 관리

Troubleshooting and Maintenance

Solution

To enable it, see

Factory Reset of Phone Has Deleted 802.1X Shared Secret

Problem

After a reset, the phone does not authenticate.

Cause

These errors typically indicate that the phone has completed a factory reset (see

while 802.1X was enabled. A factory reset deletes the shared secret, which is required for 802.1X authentication

and network access.

Solution

To resolve this, you have two options:

• Temporarily disable 802.1X authentication on the switch.

• Temporarily move the phone to a network environment that is not using 802.1X authentication.

Once the phone starts up normally in one of these conditions, you can access the 802.1X configuration menus

and re-enter the shared secret (see

Audio and Video Problems

The following sections describe how to resolve audio and video problems.

Phone Display Is Wavy

Problem

The display appears to have rolling lines or a wavy pattern.

Cause

The phone might be interacting with certain types of older fluorescent lights in the building.

Solution

Move the phone away from the lights or replace the lights to resolve the problem.

No Speech Path

Problem

One or more people on a call do not hear any audio.

802.1X Authentication and Status

Factory Reset of Phone Has Deleted 802.1X Shared Secret

Menus.

Menus).

Troubleshooting and Maintenance

Factory Reset, on page

20)