Epson EasyMP Monitor 4.50 운영 매뉴얼 - 페이지 7

{카테고리_이름} Epson EasyMP Monitor 4.50에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EasyMP Monitor 4.50 47 페이지. Operation guide - easymp monitor v4.50
Epson EasyMP Monitor 4.50에 대해서도 마찬가지입니다: 운영 매뉴얼 (11 페이지)

페이지 인쇄

Installing EasyMP Monitor

Operating environment

This software is compatible with computers that comply with the

following requirements.

Windows 2000 Professional SP4

Windows XP Home Edition SP2/SP3

Windows XP Professional SP2/SP3

Windows Vista

(All editions except Starter Edition)

Windows Vista SP1/SP2

(All editions except Starter Edition)

Windows 7 32 bit version

(All editions except Starter Edition)

Windows 7 64 bit version

• Internet Explorer Ver. 5.0 or later must be installed.

CPU

Pentium MMX 166 MHz or higher (Pentium II 233 MHz

or higher recommended)

Memory

64 MB or more (128 MB or more recommended)

capacity

Free hard disk

50 MB or more

space

Display

SVGA (800 x 600) or higher resolution, 32 bit or higher

display color

Supports only 32 bit version of OS.

• Macintosh computers cannot be used.

• Operations carried out at the computer may become slow depending

on the number of projectors being managed. If this happens, use a

computer with higher specifications.

• EasyMP Monitor cannot be used in environments which do not allow

pings to be transmitted.

Transferring the settings

If you are already using EasyMP or EMP Monitor, you can transfer the

projector settings to this version. The settings are stored as a data file

(EMP Monitor.dat). Make a copy of the EMP Monitor.dat before you

install this software. EMP Monitor.dat can be found at the following

location if the default settings were used to install the software:

• If your operating system is Windows 2000 or Windows XP

"C:\Program Files\EPSON Projector\EasyMP (or EMP) Monitor Ver.

x.xx (Ver. x.xx represents the software version)"

• If your operating system is Windows Vista or Windows 7

"C:\Users\(User Name)\AppData\Local\VirtualStore\Program

Files\EPSON Projector\EasyMP (or EMP) Monitor Ver. x.xx (Ver. x.xx

represents the software version)"

If you cannot find the "AppData" folder, click "Start" - "Control Panel"

- "Appearance and Personalization" - "Folder Options". Select "View"

tab, and then configure the "Show hidden files, folders, and drives"

setting in "Advanced settings".

After installing this software, follow the instructions below before

starting EasyMP Monitor to transfer the settings.

• If your operating system is Windows 2000 or Windows XP

Overwrite the existing EMP Monitor.dat file with the copy you made.

The existing EMP Monitor.dat file is in "C:\Program Files\EPSON

Projector\EasyMP Monitor Ver.x.xx".