Cisco 8811 매뉴얼 - 페이지 12

{카테고리_이름} Cisco 8811에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8811 44 페이지. Calltower vpn enabled phone
Cisco 8811에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지), 특징 (16 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (28 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 사용자 설명서 (30 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 문제 해결 (4 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (22 페이지), 시작하기 (2 페이지), 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 (2 페이지)

Connect with Activation Code Onboarding

Procedure

Step 1

Press Applications

Step 2

Select Admin settings.

Step 3

Select one of the following menu items:

• All phones connected to the Ethernet: Ethernet setup

• Cisco IP Phone 8861 and 8865 users that use Wi-Fi: Network setup > Wi-Fi client setup

Step 4

Select IPv4 Setup.

Step 5

Navigate to Alternate TFTP and choose On.

Step 6

Select TFTP server 1.

Step 7

Enter your TFTP server address in the TFTP server 1 field.

Step 8

Press Apply.

Step 9

Press Continue.

Step 10

Press Exit.

Connect with Activation Code Onboarding

If your network has been configured to support this feature, then you can use Activation Code Onboarding

to connect to your company's phone network.

Enter an Activation Code

Activation codes are used to set up your new phone. They can only be used once, and expire after 1 week.

Contact your administrator if you don't know your code or if you need a new one.

Procedure

Step 1

Enter your activation code on the activation screen.

Step 2

Press Submit.

Activate Your Phone with a QR Code

If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter

manually, press Back

Before you begin

You need the QR code for your phone. If you are assigned to a phone, then the code is available on the Self

Care Portal. But your administrator may have blocked you from viewing this information.

Codes are valid for up to 1 week by default, and have an expiry date near the bottom of the graphic. If the

code has expired or if you need a code, then contact your administrator.

Your Phone

to return to the QR code screen.

Your Phone