Cisco 8821-EX 액세서리 매뉴얼 - 페이지 12

{카테고리_이름} Cisco 8821-EX에 대한 액세서리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8821-EX 30 페이지. Wireless ip phone
Cisco 8821-EX에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger

You can use the Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger to charge your phone and

spare phone battery. The charger works on AC power or from a charged spare phone battery. It can be secured

with a standard laptop cable lock.

Figure 1: Cisco Wireless IP Phone 8821 and Cisco Wireless IP Phone 8821 and 8821-EX Desktop Charger

If your phone has a protective case, you don't need to remove the case before you charge the phone in the

desktop charger. You adapt the charger to fit the phone.

You can use a USB to Ethernet adapter (dongle) to connect the desktop charger to the Ethernet for only

automatic Wi-Fi profile provisioning and certificate enrollment purposes. You cannot use the dongle to make

voice calls over the Ethernet. For more information on the USB port, see the Cisco Wireless IP Phone 8821

and 8821-EX Administration Guide.

Do not use chargers or handsfree mode in a Potentially Explosive Atmosphere.

Caution

Do not charge the phone if it is wet.

Built-in Speakerphone

The charger includes a speakerphone that you can use while the phone is docked. Use the phone volume

buttons to control the speakerphone volume, and the Mute button on the charger itself. When the speakerphone

is muted, the Mute button lights red.

Phone Charging Indications

When you put the phone into the charger, the phone indicates that the battery is charging with the red LED

on the top of the phone. If the phone is turned on when you put it into the charger, you see a message on the

screen. If the phone is turned off or the battery is too weak, you see an icon displayed on the screen.

Cisco Wireless IP Phone 882x Series Accessory Guide

Cisco Accessories