Cisco 8821-EX 액세서리 매뉴얼 - 페이지 16
{카테고리_이름} Cisco 8821-EX에 대한 액세서리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8821-EX 30 페이지. Wireless ip phone
Cisco 8821-EX에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
Set Up the Multicharger
Do not use chargers in a Potentially Explosive Atmosphere.
Caution
Do not charge the phone if it is wet.
Set Up the Multicharger
The power jack is on the right side of the multicharger.
Procedure
Step 1
Plug the jack end of the power cord into the multicharger.
Step 2
Plug the other end of the power cord into the power adapter.
Step 3
Plug the power adapter into the electrical outlet.
Step 4
Place the multicharger on a stable work surface.
Install the Multicharger Wall Mount Kit
The wall mount kit comes with the following components:
• bracket
• package with 5 screws and 5 self-tapping wall anchors
Before You Begin
You need the following tools:
• Drill and a 0.25 inch drill bit
• Pencil
• Level
• Philips #1 and #2 screwdrivers
You need the power cable and power adapter.
Procedure
Step 1
Determine the location for the bracket. The bottom right corner of the bracket must be less than 50 inches
(127 cm) from an electrical outlet.
Step 2
Mount the wall bracket.
Cisco Wireless IP Phone 882x Series Accessory Guide
12
Cisco Accessories