Factory Reset from Server
Factory Reset from Server
You can restore your phone to its original manufacturer settings when your administrator factory reset it from
the server. After you reset the phone, you can reconfigure it.
When your administrator factory reset your phone, you will observe the following notifications on the phone
screen.
• If the phone is idle and has no active call or the phone is not upgrading, it shows a message, Factory
• If the phone is busy with an active call or the phone is upgrading, it shows a message, Phone will factory
Identify Phone Issues with a URL in the Phone Web Page
When the phone doesn't work or doesn't register, a network error or any misconfiguration might be the cause.
To identify the cause, add a specific IP address or a domain name to the phone admin page. Then, try to access
so that the phone can ping the destination and display the cause.
Procedure
In a supported web browser, enter a URL that consists of your phone IP address and the destination IP that
you want to ping. Enter the URL using the format:
http:/<Phone IP>/admin/ping?<ping destination>
<Phone IP> = actual IP address of your phone.
/admin = path to the access admin page of your phone.
<ping destination> = any IP address or domain name that you want to ping.
The ping destination allows only alphanumeric characters, '-', and "_" (underscores). Otherwise the phone
shows an error on the web page. If the <ping destination> includes spaces, the phone uses only the first part
of the address as the pinging destination.
For example, to ping the 192.168.1.1 address:
http://<Phone IP>/admin/ping?192.168.1.1
Lost Phone Connectivity
Sometimes your phone loses its connection to the phone network. When this connection is lost, your phone
displays a message.
If you are on an active call when the connection is lost, the call continues. But, you don't have access to all
normal phone features because some functions require information from the call control system. For example,
your softkeys might not work as you expect.
When the phone reconnects to the call control system, you'll be able to use your phone normally again.
For more information on phone registration, please visit
Your Phone
28
resetting as per request from administrator, then the phone reboots to complete the factory reset.
reset when idle as per request from administrator. After the phone becomes idle, it shows Factory
resetting as per request from administrator, then the phone reboots to complete the factory reset.
, where:
Manual phone
registration.
Your Phone
페이지 인쇄