Cisco 8841 사용자 설명서 - 페이지 13

{카테고리_이름} Cisco 8841에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8841 30 페이지. Mpp phones
Cisco 8841에 대해서도 마찬가지입니다: 릴리스 정보 (24 페이지), 사용자 설명서 (16 페이지), 빠른 참조 매뉴얼 (7 페이지), 특징 (16 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (6 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (28 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 사용자 설명서 (29 페이지), 매뉴얼 (44 페이지), 빠른 시작 매뉴얼 (2 페이지), 짧은 설명서 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 매뉴얼 (22 페이지), 시작하기 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (48 페이지), 사용자 설명서 (40 페이지), 빠른 시작 (2 페이지)

Make a Call with a Speed-Dial Code

Before you begin

Set up speed-dial codes on the phone web page or from your phone's Applications menu.

Procedure

Enter the speed-dial code and press Call.

Configure a Speed Dial on a Line Key

You can press any idle line key on your phone and set up speed dial on it. The speed-dial icon, the name, and the

extension number are displayed on your phone screen next to the line key. You can also verify this change by

checking the Extended Function field on the web page. After you configure the speed dial on a line key, you can

press the line key to modify the speed-dial information and assign a new phone number and name. You can press

the line key that has speed-dial configured to speed dial a number.

You can configure your key expansion module line key as a speed dial key and you can press that line key to

speed dial a number. Your administrator configures the key expansion module line key as a speed dial key from

the phone web page.

Procedure

Step 1 Press any idle line key on your phone for at least two seconds.

Step 2 In the Speed-Dial window, add the speed-dial name and phone number to call when you press this line

key.

Step 3 Click Save.

Remove a Speed Dial from a Line Key

You can press a line key on your phone and delete speed dial assigned to it. The speed dial on the line key is

removed. Check the phone web page to confirm that the speed dial is removed.

Procedure

Step 1 Press a line key that has a speed dial configured for at least two seconds.

Step 2 Press Option > Delete in the Speed-Dial window on the phone screen.

Use the Line in Focus for Speed-Dial Calls

You can configure a line key to perform a speed dial either with a Voice Profile ID (VID) or without a VID. When

both are configured, VID has a higher priority. The call is routed to that line.

If a line key is configured without VID, you can configure a speed-dial key to use the line in focus.

Procedure

13 |

P a g e

Cisco IP Phone 8800 Series User Guide