ACD Cal 2000 사용 설명서 - 페이지 5

{카테고리_이름} ACD Cal 2000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACD Cal 2000 13 페이지. Gas generator release vi

Cell Installation and Removal

There are no tools required by the end user for ser-

vice of the instrument. The electrochemical cells

are shipped seperate of the unit and should be in-

stalled on receipt.

To install the cell, remove the bottom

cover of the instrument. This is done by pulling each of the

'plunger feet' on the bottom of the instrument. Once all of

the plungers have been pulled out, the bottom cover is sim-

ply removed from the instrument.

The cell is keyed to ensure proper alignment into the in-

strument. When installed, the circuit board of the cell should

be flat with the bottom of the instrument. Push up on the

clear window at the back of the instrument to eject the cell.

Page 3

warranty of fitness for a particular purpose. In no event

shall Advanced Calibration Designs, Inc. be liable for

direct, incidental or consequential loss or damage of any

kind connected with the use of its products or failure of its

products to function or operate properly.

The following is a listing of the available electrochemical

Cal 2000 cells and their standard prorated warranty when

installed in equipment manufactured and supplied by

Advanced Calibration Designs, Inc.

50 Hour Generating Cells

1. Chlorine - One year or 50 hours of use.

2. Hydrogen Sulfide - One year or 50 hours of use.

3. Hydrogen Cyanide - One year or 50 hours of use .

4. Hydrogen - One year or 50 hours of use .

5. Chlorine Dioxide - One year, 50 hours of use .

100 Hour Generating Cells

1. Chlorine - One year or 100 hours of use.

2. Hydrogen Sulfide - One year or 100 hours of use.

3. Hydrogen Cyanide - One year or 100 hours of use .

4. Hydrogen - One year or 100 hours of use .

5. Chlorine Dioxide - One year, 100 hours of use .

Page 20