Cisco 8851 사용자 설명서 - 페이지 15

{카테고리_이름} Cisco 8851에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8851 15 페이지. Mpp
Cisco 8851에 대해서도 마찬가지입니다: 릴리스 정보 (24 페이지), 사용자 설명서 (16 페이지), 빠른 참조 매뉴얼 (7 페이지), 특징 (16 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 사용자 설명서 (24 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (28 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 사용자 설명서 (30 페이지), 사용자 설명서 (29 페이지), 매뉴얼 (44 페이지), 매뉴얼 (13 페이지), 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 짧은 설명서 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 사용자 설명서 (11 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 매뉴얼 (22 페이지), 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지), 시작하기 (2 페이지), 매뉴얼 (48 페이지), 사용자 설명서 (40 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 (2 페이지), 빠른 참조 매뉴얼 (8 페이지)

페이지 인쇄
Cisco 8851 사용자 설명서
1.
Hit the Applications
Bluetooth Device".
2.
Put your cell phone into Bluetooth mode (see the cell phone's instructions for how to do this).
3.
You should see your phone pop up on the 8851's screen along with a message asking you to verify that the same code is
shown on both the cell phone and the desk phone. If this is true, hit the Pair Soft Key on the desk phone and the Pair key
on the cell phone.
DOWNLOADING & DELETING THE CELL PHONE CONTACT LIST
When you initially pair your cell phone with the 8851, you are asked whether you wish to download your cell phone's contact list to
the phone. This will allow you to browse the cell's contact list even when the cell phone isn't paired with the 8851. This is useful for
informational purposes, however you will not be able to dial directly from this downloaded contact list unless the phone is paired at
the time. The contact list will stay on this phone until it is deleted.
To delete a downloaded cell phone contact list:
1. Hit the Directory
2. Scroll down to highlight the cell phone contact list
3. Hit the Delete Soft Key

INITIATING A CELL PHONE CALL FROM YOUR DESK PHONE

You should now have a new button on your 8851 similar to the one below with the name of your phone.
This will act like another line on your desk phone. If you want to make a call, simply hit the button to the left of the cell phone icon
to select that "line". Your cell phone will go off hook when you dial, but you will use the 8851's handset or speakerphone as if it
were a desk phone call.
IMPORTANT NOTE: Because you're technically using your cell phone for the call, dial numbers the same way you would if you were
dialing from your cell phone. In other words, DO NOT use a 9. Also, you cannot make 4-digit on-campus calls using you cell phone
"line".

MOVING THE AUDIO OF A CELLULAR CALL BETWEEN YOUR CELL AND YOUR DESK PHONE

NOTE: This requires that your cell phone and desk phone are paired.
If you receive or make a call on your cell phone, you may move the audio of the call between your cell phone and your desk phone.
To do so, press the Move Audio soft key. This is a toggle button and will move the call back and forth between your cell phone and
your desk phone.

CONTACT INFORMATION

For questions about your phone, please contact the UCO Service Desk:
Phone: 405-974-2255
Email:
Visit: Max Chambers Library, 1
CISCO PHONE GUIDE 8851
button on your phone and then hit 3 to go to the Bluetooth screen. Hit 3 again to select "Add
button on the 8851
st
Floor
| Rev 5 - 3/2016
15