Cisco 8851 사용자 설명서 - 페이지 4

{카테고리_이름} Cisco 8851에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8851 11 페이지. Mpp
Cisco 8851에 대해서도 마찬가지입니다: 릴리스 정보 (24 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (16 페이지), 빠른 참조 매뉴얼 (7 페이지), 특징 (16 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 매뉴얼 (2 페이지), 사용자 설명서 (24 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (28 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 사용자 설명서 (30 페이지), 사용자 설명서 (29 페이지), 매뉴얼 (44 페이지), 매뉴얼 (13 페이지), 매뉴얼 (14 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (2 페이지), 짧은 설명서 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 매뉴얼 (22 페이지), 매뉴얼 (22 페이지), 빠른 시작 매뉴얼 (2 페이지), 시작하기 (2 페이지), 매뉴얼 (48 페이지), 사용자 설명서 (40 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 (2 페이지), 빠른 참조 매뉴얼 (8 페이지)

Cisco 8851 사용자 설명서
Wait some time for the phone to reboot.
NOTE:
Do not unplug or remove power to the device while it is updating firmware and
configuration.

Registering Device

This section describes how to identify the Cisco phone model, requirements that must be met
and how to register the phone using manual configuration or auto provisioning.
The following topics are covered:

Manual Configuration

Auto Provisioning
Manual Configuration
This section describes how to set UAD settings, create a PBXware Extension and register the
phone.
The following topics are covered:
UAD Settings
Creating an Extension
Registering a Phone
UAD Settings
UAD settings
Log in to PBXware web administration interface
Open a new browser window and enter the IP address in order to access the PBXware's web
administration login screen. Example: http://192.168.1.10
Log in to PBXware with the e-mail address and password.
UAD settings
Navigate to Settings: UAD.
Make sure that Cisco UAD is enabled. To check the UAD status, click the Edit icon
corresponding to the Cisco phone.
Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Click the Save button to save changes.