Epson EB-440W 설치 매뉴얼 - 페이지 13

{카테고리_이름} Epson EB-440W에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-440W 21 페이지. Interactive ultra-short-throw
Epson EB-440W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄
Epson EB-440W 설치 매뉴얼
C

Attach the setting plate to the wall plate

(1) Hang the setting plate hook onto the wall plate bar (
(2) Lift up the setting plate and pass the cables through it (
Caution
Take care not to trap the cables between the setting plate and wall plate.
(3) Tighten the two M8 x 15 mm hexagon socket head cap bolts and two M8 x 35 mm hexagon
socket head cap bolts supplied with the setting plate so that the setting plate becomes
vertical against the wall (
Use the two M8 x 35 mm hexagon socket head cap bolts to adjust the vertical slide.
s p. 18
Setting plate
D

Secure the projector to the setting plate

(1) Loosen the two screws and remove the cable cover from the projector.
C
).
Screws (2)
13
A
).
B
).
Wall plate
Wall plate bar
Setting plate hook
Cables
M8 x 15 mm hexagon socket
head cap bolts (one on left
and one on right)
M8 x 35 mm hexagon
socket head cap bolts (2)
Cable cover