Epson EB-440W 설치 매뉴얼 - 페이지 18

{카테고리_이름} Epson EB-440W에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-440W 21 페이지. Interactive ultra-short-throw
Epson EB-440W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (16 페이지)

페이지 인쇄

Adjust the vertical slide

Adjust the vertical slide with the two M8 x 35 mm hexagon socket head cap bolts at the bottom of the

setting plate. Tightening the bolts raises the setting plate, and loosening them lowers it.

The projection screen is raised or lowered accordingly.

Adjust the forward/backward slide

Loosen the four screws and adjust the slider of the setting plate.

After you finish making all of the adjustments in steps

Turn off the display of the test pattern

Press the [Esc] button on the remote control or control panel to turn off the test pattern.

Warning

Tighten all screws firmly. If the screws are not tightened firmly, the projector or setting plate

may fall and cause personal injury or property damage.

M8 x 35 mm

hexagon socket

head cap bolts (2)

Screws (4)

, tighten the screws.