Epson EB-460I 설치 매뉴얼 - 페이지 20

{카테고리_이름} Epson EB-460I에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-460I 21 페이지.

Warning

❏

Never loosen the bolts and nuts after installation. Confirm that the screws have not

become loose on a regular basis. If you find any loose screws, tighten them firmly. If the

screws are not tightened firmly, the projector or setting plate may fall and cause personal

injury or property damage.

❏

Do not hang on the setting plate or hang a heavy object on the setting plate. If the

projector or setting plate falls, it could cause personal injury or property damage.

8. Appendix

Using the Easy Interactive Function

After you install an Easy Interactive Function compatible model (EB-460i/450Wi), you need to install the Easy

Interactive Driver and perform calibration (to align the positions of the cursor and Easy Interactive Pen).

For details, refer to the supplied Quick Start Guide or the User's Guide on the Document CD-ROM.

If the projector is to be installed in a room where it will be left unattended, you can use a commercially

available theft-prevention wire lock to secure the projector to a post or other object to prevent someone from

taking it.

Pass the wire of the theft-prevention wire lock through the security cable installation point.

For details on how to lock the wire lock, refer to the User's Guide supplied with the wire lock.

411825800EN