Epson EB-480 설치 매뉴얼 - 페이지 4

{카테고리_이름} Epson EB-480에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-480 37 페이지. Ultra-short-throw projectors
Epson EB-480에 대해서도 마찬가지입니다: 사양 (2 페이지), 사양 (6 페이지), 데이터시트 (2 페이지)

페이지 인쇄
Epson EB-480 설치 매뉴얼

Place to Install the Setting Plate

Carry out the power supply wiring work for the installation location of the setting plate in advance.
Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some
kinds of fluorescent lights could interfere with the remote control of the projector.
It is recommended to keep connection cable length less than 20 meters to reduce external noise.
We recommend using stick-on screens or board screens.
When using the Easy Interactive Function, make sure the projector is setup under the following
conditions.
• The projection screen is a rectangular shape without any distortion.
• The projector is tilted at an angle of no more than ± 3
• When using Keystone, the amount of V-Keystone and H-Keystone correction is no more than ±6.

About This Installation Guide

This guide describes how to mount the short-throw projector EB-485Wi/485W/480i/480/475Wi/475W/470 to
a wall using the exclusive setting plate.
°
vertically and horizontally in relation to the projected screen.
4