Digital Loggers Personal Call Recorder 사용자 설명서 - 페이지 5

{카테고리_이름} Digital Loggers Personal Call Recorder에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Loggers Personal Call Recorder 16 페이지. Automatically record calls on your pc
Digital Loggers Personal Call Recorder에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (10 페이지)

페이지 인쇄

Use these shortcuts for quick installation. If you're

unfamiliar with logging systems, please read the entire

manual before proceeding.

Select either the handset or line cord "Y" connector

and appropriate cable.

smaller plugs than outside lines.

2. Connect the round microphone cable from the

logger to the pink MIC jack on your PC.

3. Install the software CD by placing it in your drive. If

two CDs were supplied, start with the one marked

"PL".

4. Click on the Personal Logger icon to start the

program.

5. Adjust the Voice Activation timeout and level to

appropriate values. The default timeout for

telephone calls is 20 seconds.

6. The logger automatically separates calls into files

with time stamps.

7. Calls may be replayed by opening the Instant

Replay Window, or by clicking on the audio files.

The recorder may be connected to either an inside

(PBX) analog line, or a telephone handset. Other audio

sources, such as radios or microphones can also be

connected.

To decode caller-ID and trace calls, you'll need to

connect to an outside line. If you're using a digital PBX,

you'll want the handset connection.

Personal Call Recorder

Note that handsets use