Epson EB-485W 설치 매뉴얼 - 페이지 20
{카테고리_이름} Epson EB-485W에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-485W 37 페이지. High power ultra short throw wxga projector for modern classrooms and offices
Epson EB-485W에 대해서도 마찬가지입니다: 사양 (6 페이지), 사양 (2 페이지)
페이지 인쇄
c
Install the wall plate on the wall
(1) Determine the template sheet position.
• From the projection distance table, confirm the screen size (S) and the distance between the
projection surface and wall plate (c).
• Align the Image Center line (vertical) of the template sheet with the center line (vertical) of the
projection surface.
Confirm where the beams are within the wall, and shift the position left or right as necessary.
(The position can be shifted horizontally left or right from the center line of the projection surface up
to a maximum of 45 mm.)
• Align the
line (horizontal) of the template with the height of (c).
Image Center line of template sheet
line of template sheet
(2) Attach the template sheet to the wall.
(3) Determine the position of the wall plate's mounting holes.
Use at least three mounting holes.
• If securing the wall plate in four places, make the holes indicated by A or B in the figure.
• If securing the wall plate in three places, make the holes indicated by C in the figure.
Four mounting holes
70.5 mm
Three mounting holes
20
Center line of projection
surface