Epson EB-485Wi 설치 매뉴얼 - 페이지 26

{카테고리_이름} Epson EB-485Wi에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-485Wi 37 페이지. Ultra-short-throw interactive projectors
Epson EB-485Wi에 대해서도 마찬가지입니다: 사양 (6 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Epson EB-485Wi 설치 매뉴얼
h

Secure the projector to the setting plate

(1) Loosen the two screws and remove the cable cover from the projector.
(2) Insert the slide plate into the setting plate from the interface side of the projector (
Align the 3-axis adjustment unit with the slide plate's standard position (
(3) Tighten the M4 x 12 mm hexagon socket head cap bolts (x2) (
Slide plate
Projector
interface side
M4 x 12 mm hexagon socket head cap bolts
Warning
If you use adhesives to prevent the screws from loosening or things such as lubricants or oils
on the slide plate fixing part of the projector, the case may crack and cause the projector to fall,
resulting in personal injury or property damage. Do not use adhesives, lubricants, or oils to
install or adjust the setting plate.
Screws (x2)
Washer
Spring washer
Cable cover
Bolt positions
Standard position
26
).
).
).