Epson EB-485Wi 설치 매뉴얼 - 페이지 34

{카테고리_이름} Epson EB-485Wi에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-485Wi 37 페이지. Ultra-short-throw interactive projectors
Epson EB-485Wi에 대해서도 마찬가지입니다: 사양 (6 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Epson EB-485Wi 설치 매뉴얼

7. Attaching the Covers

a
Attach the wall plate cover and end cap
(1) Attach the wall plate cover (
Depending on how the cables are wired, you may need to cut out parts of the wall
plate cover to allow the cables to be passed through it.
When cutting the thin section of the wall plate cover and passing the cables through,
make sure you perform deburring to smooth off any sharp edges to prevent damaging
the cables.
Also, make sure you operate the cutter safely.
(2) Place the end cap with the concave portion facing up (
End cap
b

Attach the cable cover to the projector

Attach the cable cover and tighten the screws (x2) to secure the cable cover.
).
Wall plate cover
Cable cover
).
Screws (x2)
34