Cisco 8941 관리 매뉴얼 - 페이지 14

{카테고리_이름} Cisco 8941에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 8941 16 페이지. Unified ip phone
Cisco 8941에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 사용자 설명서 (42 페이지), 릴리스 정보 (16 페이지), 사용자 설명서 (24 페이지), 빠른 시작 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (5 페이지), 빠른 참조 (2 페이지), 참조 매뉴얼 (28 페이지), 사용자 설명서 (20 페이지)

Set TFTP Server 2 Field

Procedure

Step 1

Unlock the CTL or ITL file if necessary (for example, if you are changing the administrative domain of the

phone). If both the CTL and ITL files exist, unlock either of the files.

Step 2

Unlock network configuration options.

Step 3

Enter an IP address for the TFTP Server 1 option.

Step 4

Scroll to the TFTP Server 2 option, press Select, and enter a new backup TFTP server IP address. If there is

no secondary TFTP Server, you can use Delete to clear the field of a previous value.

Step 5

Press Apply and then press Save.

Set Secondary Load Server

Procedure

Step 1

From Cisco Unified Communications Manager Administration, choose Device > Phone.

Step 2

Select Load server.

Step 3

Enter the server hostname or IP address.

Procedure

Step 1

Scroll to the DHCP Address Released option and press Edit.

Step 2

Press Yes to release the DHCP Address.

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic process

by cycling through the following steps.

1 The following LED buttons flash on and off during the various stages of bootup as the phone checks its

hardware. See the following table for a list of the hardware test and the LED diagnostic status.

Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0

(SCCP and SIP)

Cisco Unified IP Phone Installation