Cisco 9951 Standard 설정 매뉴얼 - 페이지 2

{카테고리_이름} Cisco 9951 Standard에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9951 Standard 4 페이지. Cisco systems telephone
Cisco 9951 Standard에 대해서도 마찬가지입니다: 데이터시트 (7 페이지), 릴리스 정보 (16 페이지), 사용자 설명서 (12 페이지), 개요 (30 페이지), 관리 매뉴얼 (8 페이지), 사용자 설명서 (48 페이지), 빠른 시작 (2 페이지), 사용자 설명서 (22 페이지), 설정 (4 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (23 페이지), (포르투갈어) 빠른 시작 설명서 (2 페이지)

Attaching the Cisco Unified Video Camera

On the same window, enable the Video Capabilities parameter.

Step 2

Click Save.

Step 3

Attaching the Cisco Unified Video Camera

To install the Cisco Unified Video Camera, you can either:

•

The USB port connector on the bottom of the Cisco Unified Video Camera attaches to the back port (not

the side port) on the Cisco Unified IP Phone 9951 or 9971. As you attach the USB connector to the back

port on the phone, the camera should slide easily into the camera pin holes on the phone.

Figure 3-4 on page 3-15

Unified IP Phone 9951.

pin holes for the Cisco Unified IP Phone 9971.

Installation Procedure

For the complete installation procedure, see the Cisco Unified Video Camera Quick Start Guide at this

location:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/8_0/english/user/qsg/qs99

camen80.pdf

Once you have attached the camera on your phone, you can control the features of the camera.

This section provides information on the features you can control from the phone:

•

The View Area feature acts as a wide angle and zoom function for your camera and allows you to adjust

the view area that is shared during video streaming. The View Area feature acts as a wide angle and zoom

function for your camera.

To adjust the camera view area, follow these steps:

Procedure

On the Cisco Unified IP Phone, press the Applications button

Step 1

Select Accessories.

Step 2

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.0 (SIP)

5-2

Attach the camera to your phone.

Attach the camera to your computer monitor (or to another object in your work area).

shows the location of the back USB port and the camera pin holes for the Cisco

Figure 3-6 on page 3-17

Adjusting the Camera View Area, page 5-2

Adjusting the Brightness Setting, page 5-3

Adjusting Auto Transmit Setting, page 5-3

Chapter 5

Setting Up the Cisco Unified Video Camera

shows the location of the back USB port and the camera

OL-20862-01