Cisco Aironet 521 빠른 시작 매뉴얼 - 페이지 14

{카테고리_이름} Cisco Aironet 521에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 521 26 페이지. Ip phones with multiplatform firmware
Cisco Aironet 521에 대해서도 마찬가지입니다: 매뉴얼 (35 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지)

페이지 인쇄

a521qsg.fmb Page 12 Monday, March 12, 2007 10:40 AM

D R A F T - C I S C O C O N F I D E N T I A L

Connecting Power

Connect the 521 series access point to a power source. The access point can

be powered locally by using an AC power module or over the Ethernet using

power sourcing equipment (PSE).

When power is supplied to the access point, a routine power-up sequence

begins which you can monitor by observing the access point status LED.

During the power up sequence the LED displays a series of colors. When the

power up sequence is complete, the LED displays a light green color to

indicate that it is ready for operation. When a client associates to the access

point, the status LED changes to blue. The LED displays amber to indicate a

problem, such as when the access point is unable to verify that the PSE is

supplying sufficient power. See the "Configuring Power" section on page 17.

Obtaining an IP Address

Your access point needs an IP address to operate. The access point is no

longer shipped with a default IP address. It obtains an IP address from your

network's DHCP server when you connect the access point to your network.

If your network does not have a DHCP server, the access point continues to

request an IP address until you assign it one.

78-18092-01