Cisco Catalyst 4000 설치 준비 - 페이지 4
{카테고리_이름} Cisco Catalyst 4000에 대한 설치 준비을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 4000 11 페이지. For cisco business edition 4000
Cisco Catalyst 4000에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (8 페이지), 시작하기 매뉴얼 (31 페이지), 최종 사용자 설명서 (6 페이지), 최종 사용자 설명서 (6 페이지)
페이지 인쇄
General Site Requirements
Preventing Electrostatic Discharge Damage
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. It
occurs when electronic printed circuit cards are improperly handled and can result in
complete or intermittent failures. Always follow ESD prevention procedures when
removing and replacing cards. Ensure that the router chassis is electrically connected to
earth ground. Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact.
Connect the clip to an unpainted surface of the chassis frame to safely channel unwanted
ESD voltages to ground. To properly guard against ESD damage and shocks, the wrist strap
and cord must operate effectively. If no wrist strap is available, ground yourself by touching
the metal part of the chassis.
Caution
antistatic strap, which should be between 750 kilohm and 10 megohm.
General Site Requirements
This section describes the requirements your site must meet for safe installation and
operation of your system. Ensure that your site is properly prepared before beginning
installation.
The router can be placed on a desktop or rack-mounted in a data processing or lab
environment. The system can be mounted in either a standard or telco rack. Optional
rack-mount kits are available.
Site Environment
The location of individual chassis and the layout of your equipment rack or wiring room
are extremely important for proper system operation. Equipment placed too close together,
inadequate ventilation, and inaccessible panels can cause system malfunctions and
shutdowns, and can make system maintenance difficult.
When planning your site layout and equipment locations, use the precautions described in
the next section, "Site Configuration Precautions," to help avoid equipment failures and
reduce the possibility of environmentally caused shutdowns. If you are currently
experiencing shutdowns or unusually high errors with your existing equipment, these
precautions will help you isolate the cause of failures and prevent future problems.
2-4 Cisco 4000 Series Installation Guide
For the safety of your equipment, periodically check the resistance value of the